Digging machine for China's forestry industry has made important contributions to the application of more and more widespread, and some users complained that fuel consumption digging machine, then there is no reduction in fuel consumption digging machine approach it ? 1, to do a good job of cleaning and lubricating diesel purification, quality assurance requirements should be carried out refueling stop in the state, the oil should be sufficient, but the oil should be added to the mark at the close dipstick, can not exceed engraved on the dipstick line. 2. Do not wrap with a cloth or other material inlet air filter, reducing the intake resistance, according to the provisions carefully check the air filter maintenance. 3, the working poor gear selection, will cause great waste, a reasonable choice is very important to work gear, engine fuel burn black smoke explanation is not completely burned, then the wrong position on the need to gear change to a more economical gear up, so as to enable higher fuel combustion efficiency. 4, the correct adjustment of actinomycetes pole digging machine traction equipment and traction with the gap clearance, do not loose no card, with the gap properly adjusted each locomotive drive to reduce the power consumption of the transmission section. 5, to choose the right tire pressure and size, tire inflation pressure should not exceed the maximum pressure rating than the general high 100 ~ 150kPa; and in the purchase of tires, the tires need to be taken into account in order to have an effect with soil attached, in which Under a condition, the best choice is greater than the height of the tire section width, the tire can increase tire adhesion to the soil and reduce slippage. The above is described for reducing fuel consumption method digging machine, and I hope after reading this helpful, if you have any further questions you can contact us want to consult, Italy. Digging machine www.huayiwkj.com